JIS Product Certification

Supporting Quality Assurance through JIS Product Certification Both In Japan and Overseas


JIS product certification | Bureau Veritas

What is JIS Product Certification?

The JIS Marking system started its over-fifty-year-history with the enactment of the Industrial Standardization Law in 1949, and this system brought about the significant contribution to the improvement of quality assurance in industrial products in Japan.
The revisions of the law in 2004 made it possible for certification to be acquired from private third parties accredited by the government of Japan (registered certification bodies), and for the JIS Mark to be placed on products certified in this way.
Bureau Veritas as a JIS accredited certification body, provides JIS product certification services. In accordance with article 1, item 4 of the Act on the Certification of Compliance with Japanese Industrial Standards, Bureau Veritas's abbreviation is "BV".


Features of Bureau Veritas

Bureau Veritas is well-versed in the inspection and certification of industrial products, both inside and outside Japan.
We handle not only JIS product certification inside Japan, but overseas as well. Rely on Bureau Veritas for JIS product certification at your overseas plants.


Basic Certification Process

After passing an initial factory audit and product testing, a certificate, valid for three years, is issued. Certification can be maintained by undergoing a surveillance audit for certification continuation at least once every three years.
JIS product certification is normally issued for products which are continuously manufactured, but we also perform certification for individual lots. Please contact us directly regarding lot certification.

Basic process of certification (for continuously manufactured products)


JIS Product Certification - Related Documents

JIS Product Certification Flowsheet  
JIS Mark Scheme Application Form (Document #: 02.01E) Updated
19OCT2015
Document describing the quality management implementation condition A (Document #: 02.02E) Updated
02FEB2012
Document describing the quality management implementation condition B (Document #: 02.03E)  
Initial Factory audit and product testing contract (Document #: 03E) Updated
24SEP2014
Certification Registration Fee Rules (Document #: 05E) Updated
24SEP2014


JIS Classifications and Numbers Certifiable by Bureau Veritas

Currently Bureau Veritas certifies products with the following JIS classification and numbers. We will continue to increase the range of JIS certifications we can issue. Please contact us for details regarding JIS classifications other than those below.

JIS Classification: A (Civil Engineering, Construction)

JIS Standard
Nr.
Name of standards Date of
registration
A 5011-2 Slag aggregate for concrete -- Part 2: Ferronickel slag aggregate 2008.3.6
A 5011-3 Slag aggregate for concrete -- Part 3: Copper slag aggregate 2008.3.6
JIS Classification: B (General Mechanical)
JIS Standard
Nr.
Name of standards Date of
registration
B 1198 Headed studs 2008.3.6
B 2011 Bronze, gate, globe, angle, and check valves 2007.3.1
B 2031 Gray cast iron valves 2007.3.1
B 2051 Malleable iron 10 K screwed valves 2007.3.1
B 2062 Sluice valves for water works 2007.3.1
JIS Classification: H (Non-Ferrous Metals)
JIS Standard
Nr.
Name of standards Date of
registration
H 2105 Pig lead 2007.3.1
H 2107 Zinc ingots 2007.3.1
H 2113 Cadmium metal 2007.3.1
H 8641 Hot dip galvanized coatings 2007.3.1
JIS Classification: K (Chemical)
JIS Standard
Nr.
Name of standards Date of
registration
K 2202 Motor gasoline 2007.3.1
K 2203 Kerosine 2007.3.1
K 2204 Diesel Fuel 2007.3.1
K 2205 Fuel oil 2007.3.1
JIS Classification: Z (Welding)
JIS Standard
Nr.
Name of standards Date of
registration
Z 3211 Covered electrodes for mild steel, high tensile strength steel and low temperature service steel 2008.3.6
Z 3221 Stainless steel covered electrodes 2008.3.6
Z 3223 Covered electrodes for molybdenum steel and chromium molybdenum steel 2008.3.6
Z 3232 Aluminium and aluminium alloy welding rods and wires 2008.3.6
Z 3251 Covered electrodes for hardfacing 2008.3.6
Z 3282 Soft solders -- Chemical compositions and forms 2008.3.6
Z 3283 Resin flux cored solders 2008.3.6
Z 3312 Solid wires for MAG and MIG welding of mild steel, high strength steel and low temperature service steel 2008.3.6
Z 3313 Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel 2008.3.6
Z 3321 Stainless steel rods, wires and strip electrodes for welding 2008.3.6
Z 3323 Stainless steel flux cored wires and rods for arc welding 2008.3.6


The Criteria of Competence for Certified Auditors
- The Criteria of Competence for JIS Product Certified Auditor

Bureau Veritas (BV) holds experienced auditor for JIS Product Certification.
The auditor peforms;
- "Product certification auditor" for factory audit and system audit.
- "Laboratory auditor" to conduct tests and judge the results of the tests.
- "JIS synthetic certified auditor" and "product certification judge" to judge above synthetically.
The auditors are required;

- Product certification auditor
  1. Conducts audit in manufacuring or processing industries more than three times and 10 days within last three years
or
Conducts product inspection in manufacuring or processing industries more than three times and 10 days within last three years, and conducts audit in manufacuring or processing industries more than once.
  2. Knowlege about standarization/quality control.
  3. More than two years experience in the field of audited products.
- Labolatory auditor
  1. Knowlege about standarization/quality control
  2. Completed the training about JIS Q 17025 (ISO/IEC 17025)
BV requires and controls the following against the qualified auditors.
- To follow the rules defined by BV, which includes confidentiality & non-conflict of interest.
- To declare the past/current relationship between asigned auditor and supplier or designer of the product to be audited.


JIS Product Certification - Contact

Certification Division
BUREAU VERITAS JAPAN CO., LTD.
Silk Building 2F, 1 Yamashita-cho, Naka-ku, Yokohama, 231-0023 Japan【MAP (JP)】
scssales.yok@jp.bureauveritas.com
TEL:81-(0)45-651-4784  FAX:81-(0)45-641-4330
*Inquiry form is available here (JP)

 

TEL:045-651-4785

お問い合わせフォーム

 

お見積り依頼はこちらから

 

認証機関の変更をご検討ですか

 

パンフレット・フライヤーをダウンロード

 

開催予定一覧はこちら

 

事例紹介(認証取得事例)

 

関連サービス